LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection - Diesel >> Sensor - Boost Pressure >> Installation >> Boost Pressure Sensor

Boost Pressure Sensor

Fig 1: Sensor Locations
GC0025703Courtesy of CHRYSLER LLC
1 - BOOST PRESSURE/INTAKE AIR TEMPERATURE SENSOR
2 - FUEL RAIL PRESSURE SENSOR
  1. Install sensor (1) and retaining bolts into cylinder head cover/intake manifold. Torque to 5.4 N.m (48 in. lbs.). See Fig 1.
  2. Connect sensor electrical connector.
  3. Install engine cover and bracket assembly. Refer to INSTALLATION .
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals