LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, 4WD, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Rear >> Spring >> Removal >> Coil Spring

Coil Spring

Fig 1: Coil Spring
GC0025068Courtesy of CHRYSLER LLC
  1. Raise and support the vehicle. Position a hydraulic jack under the axle to support the axle.
  2. Remove the shock absorber lower bolt from the axle bracket.
  3. Lower the hydraulic jack and tilt the axle and remove the coil spring (3). See Fig 1.
  4. Remove and inspect the upper and lower spring isolators (1). See Fig 1.
scientia non olet · About LEMON Manuals