LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, 4WD, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front >> Upper Control Arm >> Installation >> Upper Control Arm - Right

Upper Control Arm - Right

  1. Install the upper control arm to the vehicle.
  2. Install the upper control arm front bolt. Tighten the bolt to 122 N.m (90 ft. lbs.).
  3. Install the upper control arm rear bolt. Tighten the bolt to 122 N.m (90 ft. lbs.).
  4. Install the cruise control servo mounting nuts.
  5. Install the air box. Refer to INSTALLATION .
  6. Install the upper ball joint nut. Tighten the nut to 81 N.m (60 ft. lbs.).
  7. Install the right side tire and wheel assembly. Refer to STANDARD PROCEDURE .
  8. Lower the vehicle.
  9. Perform a wheel alignment. See STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals