LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Grand Cherokee SRT-8 >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine & Automatic Transmission Cooling System) >> Engine >> HEATER, Engine Block >> Installation >> 3.0L Diesel

3.0L Diesel

WARNING: This page is about a different car, the 2009 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Risk of injury to skin and eyes due to scalding from hot coolant. Do not open the cooling system unless the temperature is below 90°C (194°F). Wear protective clothing and eye wear. Risk of poisoning if coolant is swallowed. Store coolant in proper and appropriately marked containers.
  1. Disconnect the negative battery cable.
    Fig 1: Engine Block Heater &Engine Mount
    GC0118273Courtesy of CHRYSLER LLC
    1 - ENGINE BLOCK HEATER
    2 - CORE PLUG
    3 - ENGINE MOUNT
    4 - WIRING TIE STRAPS
  2. Drain the cooling system. See Standard Procedure 
  3. Record the location and snip the wire ties (4).
  4. Unscrew the engine block heater (1) from the core plug hole and remove .