LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Grand Cherokee Limited, 5.7 2, RWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> 545RFE Automatic Transmission (Service Information) >> Sensor-Output Speed >> Removal >> Output Speed Sensor

Output Speed Sensor

Fig 1: Locating Input Speed, Output Speed and Line Pressure Sensors
GC0005202Courtesy of CHRYSLER LLC
1 - OUTPUT SPEED SENSOR
2 - LINE PRESSURE SENSOR
3 - INPUT SPEED SENSOR
  1. Raise vehicle.
  2. Place a suitable fluid catch pan under the transmission.
  3. Remove the wiring connector from the output speed sensor (1). See Fig 1.
  4. Remove the bolt holding the output speed sensor (1) to the transmission case.
  5. Remove the output speed sensor (1) from the transmission case.
scientia non olet · About LEMON Manuals