LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Grand Cherokee Laredo, 3.7 K, AWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front >> Hub/Bearing >> Removal

Suspension System: Front: Hub/Bearing: Removal

  1. Raise and support the vehicle.
  2. Remove the wheel and tire assembly.
    Fig 1: Removing/Installing Caliper
    GC0026764Courtesy of CHRYSLER LLC

    Support the caliper, Do not let the caliper hang by the hose. 

  3. Remove the disc brake caliper (1). Refer to REMOVAL .
    Fig 2: Caliper Adapter
    GC0026765Courtesy of CHRYSLER LLC
    1 - CALIPER ADAPTER
    2 - KNUCKLE
    3 - CALIPER ADAPTER BOLTS
    4 - ROTOR
  4. Remove the brake caliper adaptor (1). Refer to REMOVAL .
    Fig 3: Disc Brake Rotor Hub & O-Ring
    GC0026766Courtesy of CHRYSLER LLC
    1 - ROTOR
    2 - O-RING
  5. Remove and discard the o-ring (2) and then remove the disc brake rotor (1). Refer to REMOVAL .
    Fig 4: Removing/Installing Wheel Speed Sensor
    GC0026763Courtesy of CHRYSLER LLC
  6. Remove the wheel speed sensor nut (2).
  7. Remove the wheel speed sensor. Refer to REMOVAL .
  8. Remove the 3 hub bearing mounting bolts from the back of the steering knuckle. Remove hub bearing (3) from the steering knuckle.
scientia non olet · About LEMON Manuals