LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Grand Cherokee Laredo, 3.0 M >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Rear >> Stabilizer Link >> Installation >> Base

Stabilizer Link: Installation: Base

  1. Install the upper bolt for the stabilizer link to the frame and tighten to 102 N.m (75 ft. lbs.).
  2. Install the stabilizer link to the stabilizer bar.
  3. Install the nut and tighten to 88N.m (65 ft. lbs.).
  4. Remove the jack and lower the vehicle.
scientia non olet · About LEMON Manuals