LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Grand Cherokee Laredo, 3.0 M >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front >> Stabilizer Link >> Installation

Stabilizer Link: Installation

Fig 1: Identifying Stabilizer Link, Tie Rod End & Clevis Bolt
GC0026784Courtesy of CHRYSLER LLC
  1. Install the stabilizer link (3) to the vehicle.
  2. Install the lower link bolt (6) and tighten to 115 N.m (85 ft. lbs.)
  3. Install the upper link bolt/nut (1&2) and tighten to 108 N.m (80 ft. lbs.).
  4. Install the tire and wheel assembly.
  5. lower the vehicle.
scientia non olet · About LEMON Manuals