Clevis Bracket: Installation

Fig 1: Identifying Clevis Bracket & Shock

Courtesy of CHRYSLER LLC

Install the clevis bracket (3) to the shock (1) and tighten bolt (2) to 122 N.m (90 ft. lbs.).

Fig 2: Identifying Stabilizer Link, Tie Rod End & Clevis Bolt
Courtesy of CHRYSLER LLC

NOTE: Orientation of the flag bolt is critical Flag and head of the bolt (7) must be installed on the forward side of the lower control arm.
Install the lower stabilizer link bolt (6) and tighten to 115 N.m (85 ft. lbs.).

Fig 3: Identifying Clevis Bracket & Shock
Courtesy of CHRYSLER LLC
Install the lower clevis bolt/nut (4) at the lower control arm and tighten to 169 N.m (125 ft. lbs.).

Fig 4: Removing/Installing Upper Ball Joint At Knuckle
Courtesy of CHRYSLER LLC
Install the upper ball joint (2) into the knuckle (3) and tighten the nut to 95N.m ( 70ft. lbs.).

Fig 5: Removing/Installing Caliper
Courtesy of CHRYSLER LLC
Install the disc brake rotor.
Install the caliper adaptor mounting bolts (3) to 25 N.m ( 18 ft. lbs.).
Install the tire and wheel assembly.
Lower the vehicle.