LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Grand Cherokee Laredo, 3.0 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Ignition System (Service Information)) >> Plug-Glow >> Installation >> Glow Plug

Glow Plug

WARNING: This page is about a different variant/trim than selected.
  1. Install glow plug. Tighten glow plugs to 12 Nm (106 lbs. in.).
  2. Connect glow plug electrical connector (1).
  3. Install engine cover. Refer to INSTALLATION .
  4. Connect negative battery cable.