LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Grand Cherokee Laredo, 3.0 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (6.1L Engine (Service Information)) >> Engine Mounting >> Mount-Engine-Rear >> Installation >> 4X4

Engine Mounting: Mount-Engine-Rear: Installation: 4X4

WARNING: This page is about a different variant/trim than selected.
Fig 1: Removing/Installing Engine Rear Mount (4X4)
GC0027234Courtesy of CHRYSLER LLC
  1. Position the transmission mount (1) on the transmission. Install the bolts (2) that attach the transmission mount to the transmission.
  2. Tighten the bolts to 30 N.m (22 ft. lbs.).
  3. Install the crossmember.
scientia non olet · About LEMON Manuals