LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Grand Cherokee Laredo, 3.0 M >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (4.7L Engine (Service Information)) >> Engine Block >> Flex Plate >> Installation

Flex Plate: Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Flexplate Loosening/Tightening Sequence
GC0003829Courtesy of CHRYSLER LLC
1 - FLEXPLATE
  1. Position the flexplate onto the crankshaft and install the bolts hand tight.
  2. Tighten the flexplate retaining bolts to 60 N.m (45 ft. lbs.) in the sequence shown.
  3. Install the transmission. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals