LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Compass Limited, FWD, Standard >> Repair and Diagnosis >> Electrical >> Body Electrical >> Wiring Diagram Information >> Standard Procedure >> Testing For A Short To Ground

Testing For A Short To Ground

  1. Remove the fuse and disconnect all items involved with the fuse.
  2. Connect a test light or a voltmeter across the terminals of the fuse.
  3. Starting at the fuse block, wiggle the wiring harness about six to eight inches apart and watch the voltmeter/test lamp.
  4. If the voltmeter registers voltage or the test lamp glows, there is a short to ground in that general area of the wiring harness.
scientia non olet · About LEMON Manuals