Crankshaft Position Sensor: Removal: Removal

Fig 1: 2.0L DIESEL BELLY PAN

Courtesy of CHRYSLER LLC

1. Remove the battery. Refer to REMOVAL .
2. Remove the battery tray. Refer to REMOVAL .
3. Remove the belly pan (4).
   Fig 2: 2.0L DIESEL AIR INLET AT THROTTLE BODY

   Courtesy of CHRYSLER LLC
4. Disconnect the air inlet hose (1) from the throttle body.
   Fig 3: 2.0L DIPSTICK TUBE BOLTS

   Courtesy of CHRYSLER LLC
5. Remove the upper dipstick tube support bracket bolt (1).
   Fig 4: PEDAL AND APPS SENSOR

   Courtesy of CHRYSLER LLC
6. Disconnect the boost pressure sensor harness connector (1).
   Fig 5: 2.0L DIESEL AIR INLET TUBE

   Courtesy of CHRYSLER LLC
7. Remove the bolt (1) from the intercooler outlet tube, the clamp at the intercooler, and remove the intercooler outlet tube.
8. Remove the lower dipstick tube support bracket bolt, and the wiring harness bracket bolt from the oil cooler assembly.
9. Position the dipstick tube aside.
10. Drain the engine coolant.
    Fig 6: 2.0L DIESEL OIL COOLER LINE

    Courtesy of CHRYSLER LLC
11. Disconnect the coolant supply (1) and return (2) lines from the oil cooler assembly.
    Fig 7: 2.0L TURBO OIL LINE

    Courtesy of CHRYSLER LLC
12. Disconnect the turbocharger oil supply line (1) from the oil cooler assembly.
    Fig 8: 2.0L DIESEL OIL COOLER LINE

    Courtesy of CHRYSLER LLC
13. Disconnect the oil pressure sensor harness connector (3).
    Fig 9: 2.0L TURBO OIL LINE

    Courtesy of CHRYSLER LLC
14. Remove the turbocharger oil supply line support bracket bolt (2).
    Fig 10: 2.0L DIESEL OIL COOLER

    Courtesy of CHRYSLER LLC
15. Remove the 4 bolts from the oil cooler/filter adapter assembly (1).
16. Remove the oil cooler/filter assembly.
    Fig 11: 2.0L DIESEL CRANK POS SENS

    Courtesy of CHRYSLER LLC
17. Disconnect the crankshaft position sensor harness connector.
18. Remove the crankshaft position sensor bolt (1).
19. Remove the crankshaft position sensor (2).