Slave Cylinder

Fig 1: Removing/Installing Concentric Slave Cylinder

Courtesy of CHRYSLER LLC

Install slave cylinder (1) to transaxle using new bolts.
NOTE: Torque three CSC body screws first, then torque the fluid tube attachment.
Torque slave cylinder-to-case bolts in three steps:
1. 2 N.m (18 in. lbs.)
2. 5 N.m (44 in. lbs.)
3. 8.4 N.m (74 in. lbs.)
Install transaxle. Refer to INSTALLATION .
Bleed clutch hydraulic system. See STANDARD PROCEDURE .