LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Rear Suspension >> Arm-Upper Control >> Removal >> Upper Control Arm

Upper Control Arm

  1. Raise and support the vehicle. Refer to STANDARD PROCEDURE .
    Fig 1: TIRE AND WHEEL MOUNTING
    GC0052876Courtesy of CHRYSLER LLC
  2. Remove the wheel mounting nuts (3), then the tire and wheel assembly (1).
    Fig 2: REAR UPPER CONTROL ARM MOUNTING
    GC0052903Courtesy of CHRYSLER LLC
  3. Remove the nut (4) and bolt (3) securing the upper control arm (1) to the trailing link.
  4. Remove the bolt (2) securing the upper control arm (1) to the crossmember.
  5. Remove the upper control arm (1).
scientia non olet · About LEMON Manuals