OUTLET, Power: Removal: Removal
WARNING: This page is about a different car, the 2009 Jeep Patriot and 2009 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Look inside and note position of the retaining bosses (1).
- Using special tool 9857 Power Outlet Remover. Insert the tool forcing the bosses out of base.
- Pull out the base through mounting ring by gently rocking the tool (3).
- Disconnect the base wires.
- Set base aside and remove base mount ring.