LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Electronic Control Modules (Service Information)) >> Module, Transmission Control >> Standard Procedure >> Transmission Control Module Initialization >> Relearn, After Replacing A Transaxle

Relearn, After Replacing A Transaxle

WARNING: This page is about a different car, the 2009 Jeep Patriot and 2009 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition key to RUN.
  2. Clear learning memory using the scan tool.
  3. Turn the ignition key to OFF/LOCKED for 2 seconds.
  4. Turn the ignition key to RUN Clear DTCs.
  5. Turn the ignition key to OFF/LOCKED for 2 seconds.
  6. Turn ignition key to RUN.
  7. After at least 7 seconds, read DTCs.
  8. If DTCs resets. Refer to Transmission and Transfer Case/Automatic - CVT - Diagnosis and Testing .
scientia non olet · About LEMON Manuals