Esp Switch
NOTE:
The ESP Off switch is serviced as part of the accessory switch bank.
NOTE:
There are different instrument panel accessory switch banks available based on the option content of the vehicle. Ensure the accessory switch bank being installed matches the vehicle options.
- Position the accessory switch bank onto the back of the instrument panel center bezel.
- Install the screws that secure the accessory switch bank to the center bezel. Tighten the screws to 2 N.m (17 in. lbs.).
- Install the center bezel onto the instrument panel. Refer to INSTALLATION .
- Reconnect the negative battery cable.
- Perform the ABS VERIFICATION TEST and make sure the ESP Off switch operates properly. Refer to STANDARD PROCEDURE .
- Verify proper operation of all components controlled by the switch bank.