Diagnostic Test
- 1) PROGRAM ALL OF THE IGNITION KEYS
Turn the ignition on.
With the scan tool, attempt to program the key(s) into the SKREEM.
Was the programming of the key(s) successful?
Yes
- Perform SKREEM/SKIM VERIFICATION TEST .
No
- Replace the ignition key and attempt to program it into the SKREEM. If the DTC resets, replace and program the Sentry Key Remote Entry Module (SKREEM) in accordance with the Service Information.NOTE: If this vehicle is equipped with a Steering Column Lock Module, it must be replaced along with the SKREEM.
- Perform SKREEM/SKIM VERIFICATION TEST .