Final Drive

Fig 1: PIN PUNCH AT ROLL PIN

Courtesy of CHRYSLER LLC

Remove the roll pin using a pin punch (1).

Fig 2: PINION SHAFT ROLL PIN
Courtesy of CHRYSLER LLC
Discard the old roll pin (3). See Fig 2.

Fig 3: PINION SHAFT
Courtesy of CHRYSLER LLC
Remove the pinion shaft (2) and inspect for excessive ware. See Fig 3.

Fig 4: PINION GEAR SHIM
Courtesy of CHRYSLER LLC
Roll the pinion gears (3) and shims (1) out of the carrier (2). See Fig 4.
Remove the pinion gear shims (1) and mark for installation.

Fig 5: PINION GEARS
Courtesy of CHRYSLER LLC
Remove the pinion gears (1) from the carrier (3). See Fig 5.

Fig 6: SIDE GEARS
Courtesy of CHRYSLER LLC
Remove the side gears (2) and shims (3) from the carrier. See Fig 6.

Fig 7: REMOVE SMALL BEARING
Courtesy of CHRYSLER LLC
If the vehicle is a two wheel drive remove the carrier bearings using Puller C-293 PA, six Inserts C-293-40 and Press Insert C-4996.

Fig 8: REMOVE LARGE BEARING
Courtesy of CHRYSLER LLC
If all wheel drive use Puller C-293 PA, six 9613 Inserts and Insert 8888 to remove the carrier bearings.