LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Compass Limited, AWD, Automatic CVT >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Continuously Variable Transmission (CVT) (Service Information) >> Cable-Gear Shift >> Removal >> Gear Shift Cable

Gear Shift Cable

Fig 1: AIR CLEANER ASSEMBLY
GC0053051Courtesy of CHRYSLER LLC
  1. Remove the air box (1). See Fig 1.
  2. Disconnect the negative battery cable (2).
    Fig 2: SHIFTER CABLE AND BRACKET
    GC0056538Courtesy of CHRYSLER LLC
  3. Remove shifter cable (2) at transmission bracket (3). See Fig 2.
  4. Remove the nut (4) on the shifter cable to shift lever.
    Fig 3: SHIFTER CABLE GROMMET
    GC0056696Courtesy of CHRYSLER LLC
  5. Remove the grommet (1) at the bulkhead.
  6. Remove the shifter. See REMOVAL .
    Fig 4: SHIFTER CABLE CLIP AT FLOOR
    GC0056697Courtesy of CHRYSLER LLC
  7. Squeeze clip (2) at cable (1).
    Fig 5: Clip And Cable
    GC0056698Courtesy of CHRYSLER LLC
  8. Pull cable from bracket (2) at bulkhead (1).
  9. Loosen the hold down bolts at the air bag module. Refer to REMOVAL .
    Fig 6: SHIFTER CABLE
    GC0056699Courtesy of CHRYSLER LLC
  10. Pull the cable (1, 2) through the bulkhead into the engine compartment.