Diagnostic Test
- 1) CHECK FOR OTHER TRANSMISSION DTCS
With the scan tool, check for other transmission DTCs.
Are there any TCC, gear ratio and/or speed sensor DTCs present in addition to P0219?
Yes
- Refer to the appropriate Transmission DTC and repair as necessary. If speed sensor DTCs are present, perform their respective tests first.
No
- Go to 2).
- 2) CHECK FOR ENGINE DTCS
With the scan tool, check for engine DTCs.
Are there any engine DTCs present?
Yes
- Refer to the appropriate Engine ELECTRICAL DIAGNOSTICS article and repair as necessary.
- Perform CVT VERIFICATION TEST .
No
- Go to 3).
- 3) CHECK IF DTC RESETS
With the scan tool erase transmission DTCs.
Test drive the vehicle and try to duplicate the setting conditions.
Pick the answer that best describes your findings:
DTC resets with a speed sensor DTC
- Refer to the appropriate Transmission DTC and repair as necessary.
DTC resets without a speed sensor DTC
- Replace or repair the CV Transmission as necessary per the Service Information.
- Perform CVT VERIFICATION TEST .
No
- Go to 4).
- 4) INTERMITTENT WIRING AND CONNECTORS
The conditions necessary to set this DTC are not present at this time.
Using the schematics as a guide, inspect the wiring and connectors specific to this circuit.
Wiggle the wires while checking for shorted and open circuits.
Were there any problems found?
Yes
- Repair as necessary.
- Perform CVT VERIFICATION TEST .
No
- Test Complete.