LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Compass Limited, AWD, Automatic CVT >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Rear Suspension >> Link-Toe >> Removal >> Toe Link

Toe Link

  1. Raise and support the vehicle. Refer to STANDARD PROCEDURE .
    Fig 1: TOE LINK
    GC0052904Courtesy of CHRYSLER LLC
  2. Remove the bolt (2) securing the toe link (3) to the trailing link.
    Fig 2: REAR TOE ADJUSTMENT CAM BOLT
    GC0052905Courtesy of CHRYSLER LLC
  3. Mark the position of the cam bolt cam on the crossmember using a paint marker or crayon. This mark will be used upon installation to help get the alignment close prior to performing rear wheel alignment. Do not use any type marker that will scratch or damage the surface of the crossmember.
  4. While holding the cam bolt head (3) stationary, loosen and remove the toe link mounting cam bolt nut (1) and washer. Remove the cam bolt.
  5. Remove the toe link (2).
scientia non olet · About LEMON Manuals