Assembly-Variable Valve Timing: Installation: Installation

Fig 1: CAMSHAFT PHASER

Courtesy of CHRYSLER LLC

CAUTION: Do not use an impact wrench to tighten camshaft sprocket bolts. Damage to the camshaft-to-sprocket locating dowel pin and camshaft phaser may occur.

1. Install phaser (2) assembly on camshaft.
   NOTE: Make sure the dowel is seated in the dowel hole and not in a oil feed hole. The dowel hole is larger than the 4 oil feed holes.
2. Install phaser retaining bolt and torque while holding camshaft in place with a wrench (1).
3. Install camshafts. Refer to INSTALLATION .