LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Commander Overland, RWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection - Diesel >> Sensor-Camshaft Position >> Removal >> Camshaft Position Sensor

Camshaft Position Sensor

Fig 1: Locating CMP Sensor
GC0039517Courtesy of CHRYSLER LLC
  1. Disconnect negative battery cable. Refer to REMOVAL .
  2. Remove engine cover.
  3. Disconnect camshaft position sensor electrical connector.
  4. Remove retaining bolt and remove sensor.
scientia non olet · About LEMON Manuals