LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Commander Overland, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection - Diesel >> Sensor-Camshaft Position >> Installation >> Camshaft Position Sensor

Camshaft Position Sensor

Fig 1: Locating CMP Sensor
GC0039517Courtesy of CHRYSLER LLC
  1. Install camshaft position sensor and tighten bolt to 8 N.m (71 in. lbs.).
  2. Reconnect electrical connector.
  3. Install engine cover.
  4. Reconnect negative battery cable.
scientia non olet · About LEMON Manuals