Automatic Transmission
GENERAL
| Component | Metric | Inch |
|---|---|---|
| Output Shaft End Play | 0.22-0.55 mm | 0.009-0.021 in. |
| Input Shaft End Play | 0.46-0.89 mm | 0.018-0.035 in. |
| 2C Clutch Pack Clearance | 0.455-1.335 mm | 0.018-0.053 in. |
| 4C Clutch Pack Clearance | 0.770-1.390 mm | 0.030-0.055 in. |
| L/R Clutch Pack Clearance | 1.00-1.74 mm | 0.039-0.069 in. |
| OD Clutch Pack Clearance | 1.103-1.856 mm | 0.043-0.073 in. |
| UD Clutch Pack Clearance | 0.84-1.54 mm | 0.033-0.061 in. |
| Reverse Clutch Pack Clearance | 0.81-1.24 mm | 0.032-0.049 in. |
| Recommended fluid | Mopar® ATF +4 | |
GEAR RATIOS
| 1ST | 3.00:1 |
| 2ND | 1.67:1 |
| 2ND PRIME | 1.50:1 |
| 3RD | 1.00:1 |
| 4TH | 0.75:1 |
| 5TH | 0.67:1 |
| REVERSE | 3.00:1 |
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Nut, Output Shaft Flange (2WD Models equipped with flange) | 149 | 110 | - |
| Fitting, cooler line at trans | 17.5 | - | 155 |
| Bolt, torque converter housing to engine upper four | 41 | 30 | - |
| Bolt, torque converter housing to engine lower four | 54 | 40 | - |
| Bolts, transmission collar | 68 | 50 | - |
| Bolt, torque converter to driveplate | 31 | 23 | 270 |
| For rear mount specifications, Refer to SPECIFICATIONS | - | - | - |
| Bolt, driveplate to crankshaft | 75 | 55 | - |
| Bolt, converter housing | 68 | 50 | - |
| Bolt, oil pan | 12 | - | 105 |
| Screw, primary fluid filter | 4.5 | - | 40 |
| Nuts, transfer case | 35 | 26 | - |
| Oil Filter, Cooler Return | 9.5 | - | 84 |
| Bolt, oil pump | 28 | - | 250 |
| Bolt, oil pump body to cover | 4.5 | - | 40 |
| Screw, plate to oil pump body | 4.5 | - | 40 |
| Bolt, valve body to case | 12 | - | 105 |
| Plug, pressure test port | 5 | - | 45 |
| Bolt, reaction shaft support | 12 | - | 105 |
| Screw, valve body to transfer plate | 5.5 | - | 50 |
| Screw, solenoid module to transfer plate | 6 | - | 50 |
| Screw, accumulator cover | 7 | - | 60 |
| Screw, detent spring | 4.5 | - | 40 |
| Bolt, input speed sensor | 12 | - | 105 |
| Bolt, output speed sensor | 12 | - | 105 |
| Bolt, line pressure sensor | 12 | - | 105 |
| Bolt, extension housing | 54 | 40 | - |
| Screw, manual valve cam retaining | 4.5 | - | 40 |
| Screw, manual selector shaft retaining | 28 | - | 250 |
| Cross-bolt, manual selector shaft | 16 | - | 140 |