Transfer Case - NV140

Fig 1: Remove/Install Rear Output Shaft Nut

Courtesy of CHRYSLER LLC

1 - HOLDER C-3281

2 - REAR OUTPUT SHAFT FLANGE

Remove the rear propeller shaft. Refer to REMOVAL .
Using Holder C-3281 (1), remove the rear companion flange (2) nut. See Fig 1.

Fig 2: Remove/Install Rear Output Shaft Flange
Courtesy of CHRYSLER LLC

1 - REAR OUTPUT SHAFT FLANGE

2 - REAR OUTPUT SHAFT
Remove the rear output flange (1) from the main shaft (2). If necessary, use a suitable 2 or 3 jaw puller to remove the output shaft flange. See Fig 2.
Remove the rear output seal with a suitable pry tool or a screw mounted in a slide hammer.