LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> Heater-Engine Block >> Installation >> Engine Block Heater - Installation-5.7L

Engine Block Heater - Installation-5.7L

Fig 1: Block Heater Components
GC0038943Courtesy of CHRYSLER LLC
1 - BLOCK HEATER
  1. Thoroughly clean cylinder block core hole and block heater seat.
  2. Insert block heater assembly (1) into the block.
  3. With block heater fully seated, tighten bolt (1) to 2 N.m (17 in. lbs.) torque.
scientia non olet · About LEMON Manuals