LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, AWD >> Repair and Diagnosis >> Steering >> Steering Column >> Rack & Pinion Power Steering System (Service Information) >> Pump >> Installation >> 3.7L & 4.7L

3.7L & 4.7L

Fig 1: Pump Pressure Line
GC0027328Courtesy of CHRYSLER LLC
  1. Install pulley on pump if removed. See INSTALLATION .
  2. Install 3 pump mounting bolts (1) and tighten to 28 N.m (21 ft. lbs.).
  3. Install the drive belt. Refer to INSTALLATION .
  4. Install the pressure hose on the pump and tighten the nut to 28 N.m (21 ft. lbs.).
  5. Install the cooler return hose at the reservoir.
  6. Add power steering fluid. See STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals