LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.7L Engine (Service Information)) >> Lubrication >> Sensor/Switch-Oil Pressure >> Operation >> Oil Pressure Sensor/Switch

Oil Pressure Sensor/Switch

WARNING: This page is about a different variant/trim than selected.

The oil pressure switch is normally "Closed." The switch changes from a "Closed" circuit to an "Open" circuit, on increasing pressure of 7 psig. The oil pressure switch changes from an "Open" circuit to a "Closed" circuit, on decreasing pressure, between 2 psig and 4 psig.

scientia non olet · About LEMON Manuals