LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.7L Engine (Service Information)) >> Engine Block >> Rod-Piston & Connecting >> Cleaning >> Piston And Connecting Rod

Piston And Connecting Rod

WARNING: This page is about a different variant/trim than selected.
CAUTION: DO NOT use a wire wheel or other abrasive cleaning devise to clean the pistons or connecting rods. The pistons have a Moly coating, this coating must not be damaged.
CAUTION: DO NOT remove the piston pin from the piston and connecting rod assembly.
  1. Using a suitable cleaning solvent clean the pistons in warm water and towel dry.
  2. Use a wood or plastic scraper to clean the ring land grooves.
scientia non olet · About LEMON Manuals