LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, AWD >> Repair and Diagnosis >> Engine Performance >> System >> DTCS P2127 To P2610 >> P2166-Accelerator Pedal Position Sensor 1 Maximum Stop Performance >> Diagnostic Test

Diagnostic Test

  1. 1) IN PLANT TEST FAILURE 

    Ignition on, engine not running.

    NOTE: This DTC is set when the APP Sensors are learned in plant but do not reach the Minimum or Maximum voltage range.

    With a scan tool, select View DTCs.

    With the scan tool, erase DTCs.

    Start the engine.

    With the scan tool, view DTCs.

    Is the DTC Active at this time? 

    Yes 

    1. Go to  2).

    No 

    1. Refer to INTERMITTENT CONDITION Diagnostic Procedure.
  2. 2) APPS RELEARN 

    With a scan tool select the ETC RELEARN function.

    Next, erase DTCs.

    Start the engine.

    Does the DTC return? 

    Yes 

    1. Replace the APPS Assembly per Service Information. After installation is complete, use a scan tool and select the ETC RELEARN function.
    2. Perform POWERTRAIN VERIFICATION TEST .

    No 

    1. Test Complete.
scientia non olet · About LEMON Manuals