LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Vehicle Theft Security System - Electrical Diagnostics >> Vehicle Theft Security - Electrical Diagnostics >> DTC Troubleshooting >> B222A-Vehicle Line Mismatch >> Diagnostic Test

Diagnostic Test

  1. 1) CONFIGURE THE INTRUSION TRANSCEIVER MODULE 

    Using the scan tool under miscellaneous functions perform the initialization procedure for the Intrusion Transceiver Module.

    With the scan tool, clear DTC(s).

    Turn the ignition off and remove the key from the ignition.

    Lock and close all doors to allow the VTSS to go from pre-arm to armed status and wait one minute.

    Disarm the VTSS.

    Using the scan tool, read DTC(s).

    Does the DTC reset? 

    Yes 

    1. Replace the Intrusion Transceiver Module in accordance with the Service Information.
    2. Perform BODY VERIFICATION TEST .

    No 

    1. Test complete.
    2. Perform BODY VERIFICATION TEST .
scientia non olet · About LEMON Manuals