Diagnostic Test
- 1) ACTIVE DTC
Ignition on, engine not running.
With a scan tool, view DTCs.
Is the DTC Active at this time?
Yes
- Go to 2).
No
- Refer to INTERMITTENT CONDITION Diagnostic Procedure.
- 2) CAN B BUS HARDWARE DTCS ALSO ACTIVE
With a scan tool check for DTCs in the FCM.
Are any CAN B Hardware related DTCs active at this time?
Yes
- Refer to DIAGNOSIS AND TESTING for the appropriate diagnostic procedures.
No
- Replace and program the Powertrain Control Module per Service Information.
- Perform POWERTRAIN VERIFICATION TEST .