LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Brake System - Electrical Diagnostics >> Abs - Electrical Diagnostics >> DTC Troubleshooting >> C1210-G Sensor Input Circuit Performance >> Monitor Conditions

Monitor Conditions

  1. When Monitored: 

    Continuously, with ignition on, until vehicle speed exceeds 20 km/h (12.4 m.p.h.) for the first time, but not if the sensor voltage is out of range.

    Or, during diagnostic mode.

    Or, if the monitoring was inhibited by a corresponding diagnostics command.

scientia non olet · About LEMON Manuals