LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Power Seat System - Electrical Diagnostics >> Power Seats - Electrical Diagnostics >> DTC Troubleshooting >> B221C-Memory Seat Module Internal >> Diagnostic Test

Diagnostic Test

  1. 1) VERIFY THAT DTC B221C-MEMORY SEAT MODULE INTERNAL IS ACTIVE 

    With the scan tool, record and erase DTC's

    Cycle the ignition switch off then back on.

    With the scan tool, read DTC's.

    Does the DTC B221C-MEMORY SEAT MODULE INTERNAL reset? 

    Yes 

    1. Replace the Memory Seat Module.
    2. Perform POWER SEAT SYSTEM VERIFICATION TEST - VER 1 .

    No 

    1. The conditions that caused this code to set are not present at this time. Using the wiring diagram/schematic as a guide, inspect the wiring and connectors.
    2. Perform POWER SEAT SYSTEM VERIFICATION TEST - VER 1 .
scientia non olet · About LEMON Manuals