LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Power Liftgate System (Service Information) >> Power Liftgate System - Service Information >> Link Rod >> Removal >> Removal

Link Rod: Removal: Removal

Fig 1: Plastic Retainer And Mounting Sphere
GC0049021Courtesy of CHRYSLER LLC
  1. Open the liftgate.
  2. Using an appropriate flat-bladed tool, pry the plastic retainer (1) up to release the locking mechanism from the mounting sphere (2). Do not try to remove the retainer, it is not designed to be removed.
    Fig 2: Link Rod Components
    GC0049020Courtesy of CHRYSLER LLC
  3. Remove the link rod (1) from the liftgate pivot bracket (2) by gently pulling the link rod away from the liftgate.
  4. Remove the D-pillar trim from the vehicle. Refer to REMOVAL for the procedure.
  5. Remove the link rod from the drive unit mounting sphere by gently pulling the link rod away from the drive unit.
scientia non olet · About LEMON Manuals