LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> Heater-Engine Block >> Removal >> Removal-3.7L

Heater-Engine Block: Removal: Removal-3.7L

Fig 1: Engine Block Heater 3.7L
GC0028727Courtesy of CHRYSLER LLC
1 - POWER CORD
2 - BLOCK HEATER
3 - CORE HOLE
  1. Drain cooling system. See STANDARD PROCEDURE .
  2. Raise vehicle on hoist.
  3. Detach power cord plug from heater.
  4. Loosen screw in center of heater. Remove heater assembly.
scientia non olet · About LEMON Manuals