LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> Steering >> Steering Column >> Rack & Pinion Power Steering System (Service Information) >> Column >> Steering Wheel >> Removal >> Steering Wheel

Steering Wheel

Fig 1: Removing/Installing Steering Wheel & Airbag
GC0027279Courtesy of CHRYSLER LLC
  1. Disable and remove the drivers side airbag (1). Refer to REMOVAL .
  2. Disconnect all the electrical connectors (2,6&7).
    Fig 2: Removing Steering Wheel
    GC0027280Courtesy of CHRYSLER LLC
  3. Partially remove the steering wheel bolt and leave the bolt in the column.
  4. Install puller (2) or equivalent using the top of the bolt to push on.
    NOTE: Ensure the bolts are threaded firmly into the steering wheel.
  5. Remove the steering wheel.
scientia non olet · About LEMON Manuals