Steering Wheel

Fig 1: Removing/Installing Steering Wheel & Airbag

Courtesy of CHRYSLER LLC

Install steering wheel (5) to the column
NOTE: Do not reuse the old steering wheel bolt (3) (a new bolt must be used)

NOTE: Be certain that the steering wheel mounting bolt is tightened to the proper torque specification to ensure proper clockspring operation.
Install the new steering wheel bolt (3). Tighten the bolt to 61 N.m (45 ft. lbs.).
Reconnect all the electrical connectors (2, 6 & 7).
Install the drivers side air bag (1). Refer to INSTALLATION .