LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis (Single Page) >> Transmission >> Transmission Control Systems >> Nag1 Automatic Transmission - Electrical Diagnostics >> Nag1 - Electrical Diagnostics >> DTC Troubleshooting >> U150A-Implausible FCM Variant Message Data Length Received >> Diagnostic Test

Diagnostic Test

  1. 1) CHECK FOR FCM CAN BUS DTCS 

    With the scan tool, read FCM DTCs.

    Are there any FCM CAN BUS DTCs present? 

    Yes 

    1. Refer to DIAGNOSIS AND TESTING and perform the appropriate symptom(s).
    2. Perform NAG1 TRANSMISSION VERIFICATION TEST .

    No 

    1. Using the schematics as a guide, check the Transmission Control Module (TCM) pins, terminals, and connectors for corrosion, damage, or terminal push out. Pay particular attention to all power and ground circuits. If no problems are found, replace and program the TCM per the Service Information. Refer to MODULE-TRANSMISSION CONTROL .
    2. Perform NAG1 TRANSMISSION VERIFICATION TEST .
scientia non olet · About LEMON Manuals