LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Wrangler SE, 2.4 1, Standard >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Intake Air Temperature Sensor >> Installation >> 2.4L

Intake Air Temperature Sensor: Installation: 2.4L

  1. Check condition of sensor o-ring.
  2. Clean sensor mounting hole in intake manifold.
  3. Position sensor into intake manifold and rotate clockwise until past release tab.
  4. Install electrical connector.
scientia non olet · About LEMON Manuals