Relay Wedge

INSTALLATION 

Fig 1: PDC Relay Wedge Remove/Install - Typical

Courtesy of DAIMLERCHRYSLER CORP.

1. From the top of the PDC housing (2), align and insert the PDC relay wedge (1) latch arms into the correct cavities in the relay cassette.
2. Gently and evenly press the PDC relay wedge (1) down into the relay cassette until both of the latches are fully engaged.
3. Install each of the removed relays into the proper cavities of the PDC relay wedge (1).
4. Install the PDC housing lower cover.