LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Liberty Renegade, 4WD, Part Time, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front >> Stabilizer Bar >> Installation

Stabilizer Bar: Installation

Fig 1: Sway Bar
GC0025565Courtesy of DAIMLERCHRYSLER CORP.
1 - STABILIZER BAR
2 - STABILIZER BAR BUSHING/CLAMPS
  1. Install the stabilizer bar (1) to the vehicle.
  2. Install the stabilizer bar bushing clamps (2). See Figure. Tighten the nuts to 149 N.m (110 ft.lbs.).
  3. Install the upper stabilizer link bolts and washer at the stabilizer bar (1). Tighten the bolt to 136 N.m (100 ft.lbs.).
  4. Install the tire and wheel assembly. (Refer to TIRES/WHEELS/WHEELS - STANDARD PROCEDURE) .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals