LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Liberty Renegade, 4WD, Part Time, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front >> Lower Control Arm >> Removal

Lower Control Arm: Removal

Fig 1: Removing/Installing Lower Control Arm
GC0024963Courtesy of DAIMLERCHRYSLER CORP.
  1. Raise and support the vehicle.
  2. Remove the tire and wheel assembly.
  3. Remove the lower clevis bracket bolt at the lower control arm (4).
  4. Remove the stabilizer link bolt at the lower control arm (4).
  5. Remove the lower ball joint nut (3).
  6. Separate the lower ball joint from the lower control arm using tool C-4150A.
    NOTE: Marking the lower control arm pivot bolts front (1) and rear (5) will aid in the assembly procedure.
  7. Mark the lower control arm pivot bolts front (1) and rear (5).
  8. Remove the front cam/pivot bolt (1). See Fig 1.
  9. Remove the rear cam/pivot bolt (5). See Fig 1.
  10. Remove the lower control arm (4) from the vehicle.
scientia non olet · About LEMON Manuals