LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Liberty Renegade, 4WD, Part Time, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front >> Clevis Bracket >> Installation

Clevis Bracket: Installation

Fig 1: Clevis Bracket
GC0024961Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the clevis bracket (2) upper bolt (1) to the shock Seat the clevis against the stop on the shock  . Tighten the bolt (1) to 61 N.m (45 ft.lbs.). See Figure.
  2. Raise the lower control arm to the lower ball joint.
  3. Install the nut to the lower ball joint. Tighten the nut to 81 N.m (60 ft.lbs.).
  4. Install the clevis bracket (2) lower bolt (3) to the lower control arm. Tighten the bolt (3) to 150 N.m (110 ft.lbs.).
  5. Install the lower stabilizer link bolt at the lower control arm. Tighten the bolt to 115 N.m (85 ft.lbs.).
  6. Install the tire and wheel assembly. (Refer to TIRES/WHEELS/WHEELS - STANDARD PROCEDURE) .
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals