LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2006 >> Liberty Renegade, 4WD, Part Time, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module-Diesel Engine Control >> Standard Procedure >> Standard Procedure - Pcm/ECM/Skim Programming - Diesel >> Pcm/Skim Programming

Pcm/Skim Programming

When a PCM (JTEC) and the SKIM are replaced at the same time perform the following steps in order:

  1. Program the new PCM (JTEC).
  2. Program the new SKIM.
  3. Replace all ignition keys and program them to the new SKIM.
scientia non olet · About LEMON Manuals