Litens Decoupler
- Thread decoupler pulley onto generator shaft by hand (right-hand threads).
- Position Special Tool 8433 into decoupler. Align tool to hex end of generator shaft.
Courtesy of DAIMLERCHRYSLER CORP.
- Do not use an adjustable, ratcheting "click type" torque wrench. Most "click type" wrenches will only allow torque to be applied in a clockwise rotation. Use a dial-type or beam-type wrench.
Tighten in counterclockwise rotation and tighten to 110 N.m (81 ft. lbs.).
- Install accessory drive belt, and generator. Refer to INSTALLATION .
- Connect negative battery cable.